Home > Waste Stripper >

Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed

Product Categories

Beijing Graphic International Trade Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed

Name: Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed
Brand: Graphica
Price: 549.88 USD

Quality Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed for sale

Place of Origin : Beijing, China

Brand Name : Graphica

Name : pneumatic waste stripper

Air Consumption : 12CFM

Air Pressure : 0.65-0.8MPa

Rotation Speed : 4500RPM

Equipped with : Hose/Tool/Oil bottle

Net Weight : 4.2kgs

Dimension : 450x180x200mm

Gas pressure : 6-8kg

Gas pipe diameter : 8*12mm

After Warranty Service : Video technical support

Packaging Details : Carton box making Die cutting GR-4500 pneumatic waste stripper
Packing:1 pc waste stripper;
1 pc water -oil seperator
1 pc air pipe 12m long
1 set of instructions
carton size:50x25

Price : $549.88/sets 1-1 sets

MOQ : 1

Contact Now

Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed

Product Name	Big Teeth Chain
Material	White Steel
Teeth No	36 pcs(for Extra Strong Model 4500)
	34 pcs(for Normal Model GR-3500)
Application	for Corrugated board paper only
Weight	0.2 kgs

Product Name	Medium teeth chain
Material	White Steel
Teeth No	36 pcs(for Extra Strong Model 4500)
	34 pcs(for Normal Model GR-3500)
Application	for thin corrugated and cardboard paper
Weight	0.2 kgs

Product Name	Small teeth chain
Material	White Steel
Teeth No	36 pcs(for Extra Strong Model 4500)
	34 pcs(for Normal Model GR-3500)
Application	only for cardboard
Weight	0.2 kgs

Part I. How to use Pneumatic waste stripper properly.
1. Pneumatic waster stripper needs at least 5p air compressor or above with large enough connected pipes. Ensure the powerful rotation of the wheel.
2. First, make sure that the pneumatic waste stripper is connected with the air source; ensure the air pressure is 8kgs and the air pipe can work normally at 8*12m/m with maximum length of 15 meters. Otherwise it cannot work.
3. Turn on the sliding switch before work, or adjust the pressure valve to the maximum.
4. Inject special pneumatic tool oil or white mineral oil at air inlet of the waste stripper, lubricate air motor.
5. Press the platen and begin to work.
6. Stack the cardboard papers which need to remove the waste part neatly and four sides in flat.
7. Drive the chain using hand, check whether it can roll freely before open the air pressure. Press the top of the cardboard stack using iron plate. The four sides of the cardboard must have cutting edge. The distance of the cutting edges should be fit the
cardboard stacking position. Arrange appropriate gap on the cutting edges, make sure waste part connects with the products. So strip the waste corner must ≥5mm, easy to make breakpoint.
8. Pneumatic waste stripper is different with other pneumatic tools. It need a week run-in period. And maintain unimpeded sliding between chain and sprocket wheel. Each half day drop a few drops of oil on the chain, to reduce friction and prolong its service time.
9. Before use each time, drop 3-4 drops of pneumatic tool oil on the air inlet of waste stripper, and idling for 2-3 seconds.
10. Pneumatic waste stripper is a precision pneumatic tool. Please don’t throw it hardly. Waste stripper’s maintenance is more important than repairs.

Part II FAQ when use the waste stripper
1. Pls ensure to add some gear chain oil timely as it takes about one week for run-in period.
2. Waste stripper did not rotate
(1) Lower air pressure, or without installation of oil water separator shall cause rusty generator. Pls spray WD-40 anti rust agent to do the cleaning.
(2)When there is over tightness or with gear stuck, pls disassemble the outer cover, adjust the sliding block to check whether the chain and gear is out of order.
(3)Pneumatic motor blade wear, please replace the blade.
(4)When the waste stripper is at work, the shredded paper will stuck into the chain. Pls take off the gas source and drop a few chain oils. Then use hand to make the chain rotate until the paper coming out. At the same time, the chain shall work by itself.
3. When the waste stripper works weakly
(1) Not enough air source pressure, pls check the air pressure and adjust
(2) Whether the Sliding switch is broken or not, Pls change it if necessary.
(3) Motor blade is with heavy ware, pls change it to 4 pieces.
(4) The chain is too tight, pls loosen the chain to suitable position to ensure non resistance sliding.
(5) Whether the bearings are broken. Pls use high quality imported gears.
(6) Pls add a few drops pneumatic tool oil to the air inlet to keep the blades smooth.
(7) Due to a large number dust will be occurred after using, pls work with a dust blowing gun to ensure that the chain is clean
and tidy.
4. Waste stripper cannot work
(1) Pls suitably adjust the paper grasp direction to best paper stripping position when the waste stripper unable to grasp paper,
(2) Pls change the chain when it’s wear out and unable to catch the paper.
(3)Pls adjust the sliding screw to suitable position and fix it firmly when the chain is loose. Pay attention to the length that is precise.

Remarks:Pls add a few 40# machine oil to the chain each time before use and make it work non load for one minute. Any violation of
this requirement will result in severe wear of chain teeth and life time reduction.

1. Artificial stripping to 3 hours, stripping machine 10 to 30 minutes to complete, greatly shorten the delivery cycle;
2. The stripping machine structure is compact, the weight and portable polishing machine is the same as the common used, use very
convenient, men and women after simple training can operation;
The damage of adhesive part
3. Clear the waste, improve the efficiency of process after the (automatic posting box/packaging);
4. The stripping machine power supply adopts Taiwan pneumatic motor, there is no carton brush like ordinary hand-held polisher
damageable problem,and good safety, equipment long service life;
5. The tooth chain of stripping machine adopts high strength alloy steel after heat treatment process, high hardness, wear
resistance,long service life, and easy to replace;
6. Reducing the occurrence of industrial injury, and other outside, Such as wrist, back, shoulder injuries and repetitive
operation motion
7. Three different teeth chain for various cardboard box or corrugated carton stripping as following:

Graphica® manual pneumatic waste stripper is advanced handy tool for paper stripping after die cutting.

Mainly used raw materials are
• high alloy tool steel (Taiwan imported motor)
• White steel(chain of teeth)
• Stainless steel(outer cover)
Our products are available as
• regular strong waste stripper(silver color)
• extra strong waste stripper(orange color)

Q1: Are you factory direct?
A1:Beijing Graphic Inte’l Trade company as a professional creasing matrix and paper cutting knife manufacturer was established in 2012, specialized in die cutting creasing matrix, paper cutting knife and paper drill bits and pneumatic waste stripper and other related products.
Our products are mainly exported to USA, Canada, Europe, South America, etc.Over 120 countries and area.

Q2:What’s your product ranges?
A2: Our main product is packaging material, main product are die cutting creasing matrix, paper cutting knives , paper drill bits, pneumatic waste stripper and so on.

Q3:Do you have a special price and service for wholesale?
A3: Beijing Graphic Inte’l Trade company is keeping search a long term business cooperation with our clients as a professional creasing matrix manufacturer.

we can OEM &ODM for our cilents, fully support and assist on service, to offer you the most competitive price with high quality product.

Q4: What payment methods can I use? And how secure is my payment?
A4: Beijing Graphic Inte’l Trade company accept your payment through Paypal, Bank Transfer,Western Union,etc.

Q5:How long does it take for my order to be shipped? And how long can I receive it?
A5:Generally, your order will be shipped within 3~7 working days after your payment received by us.

Beijing Graphic Inte’l Trade company devotes to be a fastest delivery led lights supplier.

Q6: How about the warranty?
A6: Beijing Graphic Inte’l Trade company welcome you to contact us at 24 hours per day, 7 days per week, your any question will be highly appreciated. hotline: 0086-10-87227832

Carton Pneumatic Waste Stripper Trimmer for Waste Removal at 4500RPM Rotation Speed Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Graphic International Trade Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!